The 10-hour class is intended to make employees aware of common work-related health and safety risks. For more information on building safety strategies in the Society’s Online Risk Control Library. You can also find specific building information on the OSHA website. Use these resources to identify, reduce and eliminate hazards to your equipment.
Respiratory protection: In the previous planning, all respiratory risks in a job must be identified. Written respiratory protection plans are required and must be readily available. Respiratory protection should only be used by workers after obtaining a medical qualification and a good adjustment test.
When construction workers lift heavy objects, they must use brackets to prevent injury. Employees must also wear gloves and heavy glasses when using dangerous tools. Employers must ensure safety procedures for construction workers, but workers must take many precautions themselves when working under such dangerous conditions.
In addition, dealing with bad weather can push deadlines, push general contractors and operations to the limit and tempt them to make turns and make up for time. Construction workers are at high risk when working or working with heavy equipment. Heavy equipment risks have been hit or crushed, among other things, by equipment and loads that are not properly insured. Fortunately, there are strategies that health and safety professionals can implement at work to create safer environments.
Make sure subcontractors must provide proof of insurance before you get into the workplace. This is a good resource with a few more tips on potential security risks and how to ensure that you are protected from liability. According to OSHA, approximately 2.3 million construction workers worked on scaffolding and in 2019 approximately 2,800 companies were cited for scaffolding violations. Make sure the scaffolding is firm, stiff and can carry more than four times the maximum expected weight. Work it on a sturdy base and do not hold it with unstable objects such as barrels, boxes or loose stones.
If you work in a high area and there is a risk of slipping and falling, you must use a safety harness. Employers must have the excavation inspected by a competent person before each shift to assess the area for potential landslides, potential failures of restraint systems and atmospheric hazards. They must also ensure that there is good access inside and outside the excavation. Excavations should also be inspected after rain at the workplace.
Make sure observers are assigned to help workers load and unload heavy or uncomfortable items. Use the correct mooring procedures and always double check to make sure you and your trailer covers have the correct authorization. Empower employees to be part of the security program by encouraging them to report security issues to foremen, supervisors or senior managers. If a hazard or concern is reported, management should act accordingly and not ignore it! If you ignore or disable it, your security program will be killed. Take advantage of time during new employee orientation, formal security meetings or toolbox conversations to remind employees to say something when they see something.
Chatting in the toolbox every day during a group period is an easy way to remind your crew of building safety tips. These activities are also a great way to get the debate going and build camaraderie. General security measures are important in every workplace, but your specific site may require specific standards. You may want to contact your legal team, provincial regulations Electrical and risk management specialists to ensure that all your bases are covered when it comes to details. Tips for preventing slip and fall injuries include cleaning very low-traffic ice and snow surfaces and using the desiccator after storms as soon as possible. You can also contact your insurance company to see if your loss control department meets for a consultation.